UltraTech 9-feet railroad spill containment system. Ultra-track pans have been designed to provide spill containment at industrial rail sidings and locomotive maintenance facilities. Ultra-track pans may be used to collect small spills and leaks or to capture and channel off significant spills caused by defective equipment or a major overflow. Prevent costly cleanup and regulatory fines. Modular design center and side pans are 53.5-inches long; containment areas can be easily assembled to any length desired. Sealed system polyethylene gaskets keep spills from falling between the rails and pans. Trucks and other vehicles can drive over track pans with grates in place. Economical, easy to install. Modular track pan design can be customized to meet your specific needs. To drive over track pans, firm footing must be beneath the pans; also must "ramp up" to side pans with asphalt or concrete; unique stormwater feature is designed to eliminate "pooling" of rain that falls on top of the center pan covers; rain is channeled onto the ballast between the tracks, stays out of the pans. Low maintenance - unlike carbon steel track pans, ultra-track pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun. Low cost installation lightweight track pans can be easily installed without heavy lifting equipment, i.e. Forklifts, cranes, backhoes, etc. Minimal tools and labor required. Slip resistant surfaces - pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily. Long work life - estimated to perform 20-30 years; longer than fiberglass pans. Meets SPCC and EPA stormwater management regulations. Also meets new York state chemical bulk storage regulation section 599.17c secondary containment for transfer stations.
Railroad spill containment system includes 2 center and 4 side pans
Prevent costly cleanup and regulatory fines
Modular design - center and side pans are 53.5-inches long; containment areas can be easily assembled to any length desired
All-polyethylene construction - rugged track pans withstand harsh chemicals and are designed to function in temperatures ranging from -40 to +140 degree F
Sealed system - polyethylene gaskets keep spills from falling between the rails and pans