The Door/Window 3 in 1 sensor provide (1)Door/window, (2)temperature, (3)illumination 3 sensor in 1, The sensor consists of two parts; a Detector and a Magnet. They are designed to be fitted to doors or windows with the Magnet mounted on the opening part and the Detector mounted on the fixed frame. Opening the protected door/window will remove the magnetic field, trigger the detector and generate an alarm condition, (if the system is armed).
The sensor can also applied to automatic light control, one scenario is to get the illumination lux level from built in illumination sensors and send a signal to Z-wave switch to turn the light on once we open the door when the room is dark
Every time when Door/Window trig, the sensor will also send temperature and illumination value as well. Also the temperature will send out the value when temperature changes.
Adopt newest Z-wave 400series chip, support multichannel operation and higher data rate (9.6/40/100kbps)
Higher output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range
1500mA CR123A Lithium battery to guarantee 3.5 year battery life
Built in illumination sensor while applied to light control. Adopt Z-Wave protocol to secure the success of wireless two way communication
With Tamper proof protection/ Easy install/ Low battery indication/ Z-Wave V6.02/ Z-Wave Certificated No. ZC08-13050003 Auto report the open/close status and battery status LVD: EN60950-1:2006+A11:2009 FCC part15.249 / EN300 220-1/ certification