(1) The temperature sensor is only compatible with AG13, 357A, CX157 and LR44W 1.5V batteries; batteries are NOT included and needs to be installed.
(2) Keep this item out of children's reach.
(3)Do not use this product in humid or inflammable places.
(4)Unauthorized detachment & repair is not recommended.
(5)Make sure your socket can withstand over 8A electric current, or the circuit may get burnt.
(6)To prevent scald, do not touch the head of the machine once it stops working.
(7)To keep the cylinder stator temperature in control, please change the cooling water every 30 minutes.
(8)Regularly check the engine oil and make sure oil level stays above the red dot; change engine oil if oil color turns.
?9?Please make sure to use the ISO VG46 & AW46 standard oil.
A single working time cannot exceed 30 minutes, the machine temperature cannot exceed 80 degrees Celsius. If the working time is too long or the temperature is too high, the device will enter the over-temperature protection state, automatic shutdown. If the machine is too hot, automatic shutdown is a normal phenomenon, have a rest after a few minutes the temperature can return to normal, then start again. THE PUMP WILL NOT SHUT DOWN AUTOMATICALLY WHEN THE PRESSURE REACHES 30MPA / 300bar, YOU NEED TO TURN IT OFF MANUALLY.
Working Pressure: 300BAR / 30MPA/ 4500PSI
Working Capability: 50 L / min
Inflating Speed: 2800 r / min
Weight: 44.1 lb.
Filling Time: 1L/ 10 minutes
Cooling System: Water
Oil Standard: ISO VG46 & AW46
1 x Air Compressor Pump
2 x Main Machines
1 x Hose Female
1 x Water Pump
1 x Water Cooling Pump
2 x Pressure Relief Screw
1 x Certification
1 x Spare Part
1 x Bag
1 x Separator
2 x Power Cables (110V)
Power: 110V 60HZ; Motor Power: 1.8KW; Charge pressure: 30MPA; Working Pressure: 300BAR 30MPA 4500PSI. Air pump inflating speed: 2800r/min; Work flow: 50L/min
WIDE APPLICATION: Perfect for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc.
PREMIUM QUALITY: Designed with two-stage compression and two water-oil separators for performance stability. It takes only 30 minutes to fill full 6.8L tank to 300BAR
COOLING SYSTEM: Please prepare enough cooling water, it is recommended to be a vat of water to achieve better cooling effects. WORKING WITHOUT WATER IS FORBIDDEN!
ATTENTION: Auto-stop will not engage when the pressure reaches 300BAR/30MPA?you will have to turn it off manually