How to use:
1.Prepare solder and soldering iron;Specially,it is neccessary to keep the tip clean, which should be coated with solder.
2.Please wet the spong before using.
3.Use the soldering iron to heat the weldment, such as PCB leads and pads and keep the weldment heated evenly.
4.When the temperature is high enought, put the solder wire close to the joint, the solder will melt and flow freely.
5.Please remove the solder wire when the tin is enough.
6.Take away the soldering iron in a direction approximately 45? and power off.
7.Don't pull the soldering iron tip outward and use it in that way, which will shorten the heating element lift.
Temp Range: 200~450?
Package size: 10.6 x 6 x 1.8 inches
1 x Soldering Iron Pen
1 x Solder Sucker
1 x Tin Wire Tube
5 x Soldering Tips
6 x Aid Tips
1 x Tweezers
1 x Scissors
1 x Soldering Stand with Sponge
1.Please be really careful when you are using the tools in avoidance of pricks or other injuries,You'd better keep it somewhere kids can't reach.
2.The iron heats up fast,so please select a suitable temperature. Working for long hours and high temperature may shorten its life.
3.Do not allow the iron to idle at operating temperatures for extended periods, This could burn the soldering iron and even other things.