AYT-02enlarges the picture through an optical system and output them by CCD camera. Owing to its complex
configuration and small size, the amplification is stably decided by the multiple of objective lens and the
dimension of CCD. The larger the display is, the more magnification it offers. Normally the size is
3.5inch or 5.6inch or 9inch or 14inch. The size of PC display is 15inch or 17inch. When observing
the image, to obtain a clear picture, you can adjust the contrast and brightness based on the spot light.
AYT-02 Fiber Video Microscope can offer 600 magnification for the fibers of 125um(diameter), single-mode and multi-mode are all included.
The enlarged picture is sent to the display through a video signal. Consequently the status of fiber end-face is showed clearly.
AYT-02 features its unique configuration, because of which many places can be inspected conveniently. For example, it can test the patch cord directly. It can work with either male connector ends or inspect through female bulkhead adapters.
Meanwhile, it avoids the potential eyes hazard, which may be caused by laser signal sent out from fibers if you inspect them directly. Since the product test the fiber through a display, such problem is totally not existed.
Actually, AYT-02 can be applied to anther situations familiar with the testing circumstance. It is suitable for the archaeological study. Besides, some special electronic kits and deep-hole plug-in can also be detected and so on.