Gear Type: metal gear
Motor Type: magnetic core
Potentiometer: square jamproof potentiometer
Connector Type: Futaba/JR/Hitec compatible
Connector Wire Length: 320mm (12.6 in)
No-load Current: <500mA
Operating Voltage: 6.0 --- 7.2V
Deadband Area: 4?s
Rotational Range: 180 degrees
Torque: 9 kg-cm (125.1 oz-in) at 6.0V; 10kg-cm (139 oz-in) at 7.2V
Speed: 0.16sec/60° at 6.0V; 0.14sec/60° at 7.2V
Procuct Weight: 60g (2.12 oz)
Dimensions: 40 × 20 × 40.5mm (1.57 × 0.8 × 1.6 in)
Package Including: 1pcs of standard Servo
All RC-servos have a three wire connector. One wire supplies positive DC voltage - usually 5 to 6 volts (HV servos can handle up to 8.5 VDC). The second wire is for voltage ground, and the third wire is the signal wire.
Two Bearings: less friction and slop. Because of the many vibrations and mechanical loads placed on the servo in RC helicopters, non bearing servos do develop slop very quickly and of course this makes control more sluggish and vague feeling.
Metal Gears: a popular choice for the obvious great strength and won't strip easily, survived many crashes that wrecked plastic servos.
Water Resistant: worked perfectly in the snow, rain, water and mud, making great sense with nitro RC helicopters or any nitro model that exposes the servo to nitro goo.
Wire Connecting: standard 3-pole wire, the brown for "ground", the red for "power supply", the orange for "PWM control".
Faster control response, constant torque throughout the servo travel. Equipped square jamproof potentiometer.